{"id":2422,"date":"2018-03-20T16:55:03","date_gmt":"2018-03-20T15:55:03","guid":{"rendered":"https:\/\/itwgse.com\/?page_id=2422"},"modified":"2020-06-24T10:45:58","modified_gmt":"2020-06-24T08:45:58","slug":"itwgse-2400-product-options","status":"publish","type":"page","link":"https:\/\/itwgse.com\/de\/itwgse-2400-product-options\/","title":{"rendered":"ITW GSE 2400 Product Options"},"content":{"rendered":"
\n
\n\t
\n\t\t\t<\/div>\n
\n \"\"\n\n <\/div>\n
\n
\n

ITW GSE 2400 Product Options<\/h1>\n <\/div>\n <\/div>\n<\/div>\n<\/div><\/div><\/div><\/div>
\n
\n\t
\n\n
\n\n \n
\n\t\t\t\t\t\t
\n

578803 Base Module<\/h2>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n

Additional base module, which extends the height \/length of the ground power unit by 340 mm and the weight by 20 kg.<\/p>\n

\"2400<\/p>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n \n

\n\t\t\t\t\t\t
\n

578804 Lockable Door<\/h2>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n

As a standard, the GPU is supplied with a quarter-turn lock intended for a double bit 5 mm pin key. One key is supplied per ground power unit.<\/p>\n

On an optional basis, the ground power unit can be supplied with a lockable swing handle at the front door. The handle is locked by a profile square 6 mm cylinder according to DIN 18252\/18254 (depth = 40 mm). Each ground power unit is supplied with 2 identical alike DIRAK 1333 keys.<\/p>\n

\"2400<\/p>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n \n

\n\t\t\t\t\t\t
\n

578806 Remote Control Box, 1 outlet<\/h2>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n

\"2400578806 one 400 Hz outlet<\/p>\n

578818 two 400 Hz outlets<\/p>\n

578819 one 400 Hz outlet & one 28 VDC outlet<\/p>\n

578820 one 400 Hz outlet & controls for retriever \/ hoist<\/p>\n

The control box is used for operation of the ground power unit, if placed away from the aircraft parking position or placed under a passenger boarding bridge.<\/p>\n

 <\/p>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n \n

\n\t\t\t\t\t\t
\n

578807 Additional Output Contactor (30-90 kVA)<\/h2>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n

All units are, as a standard, equipped with one output contactor.<\/p>\n

All models are, however, prepared for an additional output contactor and I\/O terminal block X2.<\/p>\n

\"2400<\/p>\n

 <\/p>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n \n

\n\t\t\t\t\t\t
\n

578808 Dry Contacts<\/h2>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n

If dry contacts are needed for additional indication \/ to the PBB or to a BMS system, this option offers the following dry contact relays:<\/p>\n

\"2400<\/p>\n

 <\/p>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n \n

\n\t\t\t\t\t\t
\n

578809 Door Interlock<\/h2>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n

The interlock ensures that the ground power unit passes into stand-by mode if the door is opened.<\/p>\n

\"product<\/p>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n \n

\n\t\t\t\t\t\t
\n

578810 Neutral Conductor Rupture Supervision<\/h2>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n

A broken neutral conductor in the 400 Hz cable combined with an unbalanced aircraft load could lead to a destructive phase-neutral voltage in the aircraft and to hazardous voltages between the aircraft chassis and the ground level. The NCR option secures that a broken neutral will be detected instantaneously.<\/p>\n

\"product<\/p>\n

\"product<\/p>\n

Wiring diagram for Neutral Conductor Rupture Supervision<\/em><\/p>\n

Unbalanced voltage at the aircraft connector due to a broken neutral would add a 400 Hz voltage to the 28 VDC interlock voltage measured at the ground power unit. If the injected AC voltage exceeds approx. 10 VAC the output is disconnected. This type of error is recognised as an interlock failure by the ground power unit. Since the disconnection is a reaction against a heavy unbalanced voltage at the aircraft connector, it means that this type of supervision does not protect sensitive equipment in the aircraft. The NCR option protects personnel as well as the aircraft in case of a broken neutral.<\/p>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n \n

\n\t\t\t\t\t\t
\n

578813 ACR 2400 Adaption<\/h2>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n If the ITW GSE 2400 unit shall be connected to an ITW GSE 2400 ACR (Automatic Coil Retriever) , option kit 578.813 shall be used. The kit includes a Circuit breaker Q5 and terminal row X4.\n\nNote<\/strong>\nThe ITW GSE 2400 must be configured to operate with the 2400 ACR, either as from the factory or via an ID Chip update via \u201cLoad Config File\u201d\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n \n
\n\t\t\t\t\t\t
\n

578814 Terminal Extension for 2 pcs of 7-core Cables<\/h2>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n

If more than 2 x cables per output phase are needed, for instance 2 \u2016 7 x 35 mm\u00b2, the terminal extension allows connection of up to 4 x cables
\nper phase.<\/p>\n

The kit consists of:<\/p>\n